Isobutyl Isobutyrate
Specifications
| Item | Index | ||
| Appearance | Colorless and transparent | ||
| Density g/cm3 | 0.9±0.1 g/cm3 | ||
| Ignition temperature | 432℃ | ||
| Critical pressure | 2.61MPa | ||
| Item | Excellent product | First class |
| Purity(WT) % | ≥99.5.0 | ≥99.0 |
| Acid content (WT) % | ≯0.02 | ≯0.05 |
| Moisture (Wt)% | ≯0.05 | ≯0.1 |
Packing & Storage
| Packing | Drums, Tank Wagons, Rail | |||||||
| Storage | Store in a cool and ventilated warehouse.Keep away from fire and heat sources.The storage temperature should not exceed 30℃.Keep the container sealed.It should be stored separately from oxidants and alkalis, and should not be mixed.Explosion-proof lighting and ventilation facilities are adopted.It is forbidden to use mechanical equipment and tools that are prone to sparks.The storage area should be equipped with leakage emergency treatment equipment and suitable containment materials. | |||||||
| Shipping | Room temperature in continental US; may vary elsewhere | |||||||
Free Quote
Phil Chemical Co.,Limited now has become the diversified large-scale trans-regional and multi-industry enterprise group, primarily engaged in supplying of raw materials for coatings, supplemented by such chemical products as Arylic acid monomers and acrylic ester together with epoxypropane and other related industry simutaneously. For samples, pricing, or more information, please call us at 0086-25-51192301 or mail to info@ascent-petrochem.com. We will respond to you as soon as possible. |
| Tel: 0086-25-51192301 E-mail: info@ascent-petrochem.com |
General Information
| Common Names | Isobutyl isobutyrate，Isobutyric acid, isobutyl ester | |||||||
| Structure |  C8H16O2 |
|||||||
| CAS No. | 97-85-8 | Boiling Point (℃) | 144.4±8.0 °C at 760 mmHg | |||||
| Molecular Weight | 144.211 | Melting Point (℃) | −81 °C(lit.) | |||||
| Appearance | Colorless and transparent | Vapour Pressure (℃) | 5.1±0.3 mmHg at 25°C | |||||
| HS Code | 2915600000 | Flash Point (°F) | 37.2±0.0 °C | |||||
| Solubility | It is soluble in diethyl ehter, n-octanol, very slightly soluble in cold water, and soluble in alcohol and most organic solvents. | Autoignition Temperature | 432 °C (810 °F) | |||||
| Safety Phrases | S16-S26-S36 | ||
| RIDADR | UN 2528 3/PG 3 | ||
| WGK Germany | 2 | ||
| Packaging Group | III | ||
| Hazard Codes | 3 | ||
| FIRST AID | |
| Inhalation | Leave the scene to a place with fresh air.Seek medical attention |
| Skin | Take off contaminated clothing and rinse the skin thoroughly with soapy water and clear water. |
| Eyes | Lift the eyelids and rinse with flowing water or saline.Seek medical attention |
| Ingestion | Drink a sufficient amount of warm water to induce vomiting.Seek medical attention. |
Frequently Asked Questions
Q: What is Isobutyl Isobutyrate used for?
A: It is mainly used as a solvent, plasticizer, and can also be used to synthesize spices, seasonings, etc.
Q: Protective measures?
Engineering control: Airtight operation, pay attention to ventilation.
Respiratory system protection: When the concentration in the air is high, a self-priming filter gas mask (half mask) should be worn.
Eye Protection: Wear chemical safety goggles.
Body protection: Wear anti-static overalls.
Hand Protection: Wear rubber oil-resistant gloves.
Other protection: Smoking is strictly prohibited at the work site. After work, take a shower. Pay special attention to eye and respiratory protection.
Q: Spill emergency treatment?
Quickly evacuate the personnel in the leaked contaminated area to a safe area, and isolate them, strictly restricting access. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure respirators and anti-static overalls. Cut off the source of the leak as much as possible. Prevent flowing into restricted spaces such as sewers and flood drains.
Small spills: Absorb with sand, vermiculite or other inert material.
Large amount of leakage: Construct dikes or dig pits for containment. Cover with foam to reduce vapor hazards. Use an explosion-proof pump to transfer it to a tank truck or a special collector, and recycle it or transport it to a waste disposal site for disposal.
Q: Handling and storage?
Operation Precautions: Airtight operation, pay attention to ventilation. Operators must undergo special training and strictly abide by the operating procedures. It is recommended that operators wear self-priming filter gas masks (half masks), chemical safety protective glasses, anti-static overalls, and rubber oil-resistant gloves. Keep away from fire and heat sources, and smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Prevent vapors from escaping into workplace air. Avoid contact with oxidants and alkalis. When handling, load and unload lightly to prevent damage to packaging and containers. Equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may be harmful residues.
Precautions for storage: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Storage temperature should not exceed 30°C. Keep container tightly closed. It should be stored separately from oxidants and alkalis, and should not be stored together. Explosion-proof lighting and ventilation facilities are adopted. Prohibit the use of mechanical equipment and tools that are prone to sparks. The storage area should be equipped with leakage emergency treatment equipment and suitable containment materials.